MAXDATA SR1202 M1 Guia do Utilizador Página 128
- Página / 152
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
128 Event Logs
Enclosure Event
Messages
Type [ID] Cause Action
Power supply <zz> is
OK.
Information
[0xC6B (3179)]
Normal condition
reported.
No action necessary.
Power supply <zz> is in
a critical state.
Warning
[0xC6B (3179)]
The specific power
supply has failed.
The specific power
supply is powered off.
Replace the power
supply.
Ensure that the specific
power supply On/Off
button is in the On
position ( l ).
Power supply <zz> is
not installed.
Error
[0xC6B (3179)]
The power supply was
removed.
Re-insert the power
supply, connect the AC
power cord and power
on the power supply.
Fan <zz> is OK.
Information
[0xC6C (3180)]
Normal condition
reported.
No action necessary.
Fan <zz> is in a critical
state.
Error
[0xC6C (3180)]
A specific fan failure.
Total fan failure.
Cooling fan module
was removed.
Replace the cooling fan
module.
Re-inset the cooling fan
module.
Temperature sensor
<zz> is OK.
Information
[0xC6D (3181)]
Temperature sensors
are reporting normal
temperatures in the
enclosure.
No action required.
Temperature <zz> is
operating outside of
specifications.
Warning
[0xC6D (3181)]
Temperature sensors
are reporting enclosure
temperatures have
reached the threshold
of 50 °C.
Ensure that both
cooling fans are
operating normally.
(Replace if needed.)
If the fans are set
to automatic speed
control, place the
jumper on the Cooling
fan module circuit
board to force the fans
to high speed.
If the environment
ambient temperature
is high, reduce the
ambient tempera-
ture. Ensure that the
airflow is not blocked
or restricted on the
enclosure.
- StorView 1
- RAID User Guide 1
- MAXDATA SR1202 M1 1
- 2 Contents 2
- Contents 3
- 8 SAN LUN Mapping 63 4
- MAXDATA SR1202 M1 – StorView 5
- 6 Contents 6
- 1 Preface 9
- 10 Preface 10
- 2 Introduction 11
- License Manager 12
- 3 StorView Quick Tour 13
- Enclosure Section 14
- Locate Enclosure 17
- Mixed Drive Types 18
- Server Sidebar Section 21
- How to Use this Document 23
- 4 Embedded StorView Setup 25
- Using Dynamic IP (DHCP) 26
- Using Static IP 26
- Getting a New IP Address 26
- 5 Getting Started 27
- 28 Getting Started 28
- Configuring E-MAIL Notices 29
- Deleting an E-MAIL Addressee 30
- Configuring SNMP Traps 31
- Changing the Password 32
- Monitoring Setting 33
- Additional Monitoring Servers 34
- 6 Storage Assistant 35
- 36 Storage Assistant 36
- 38 Storage Assistant 38
- 40 Storage Assistant 40
- Creating Disk Arrays 43
- Create the Array 45
- Initializing the Array 49
- Adding Hot Spare Drives 51
- Assigning a Global Spare 52
- Figure 32. Drive Panel Screen 53
- Figure 33. Make Spare Screen 53
- Assigning a Dedicated Spare 54
- Removing a Spare 55
- Auto Spare 55
- Create the Logical Drive 56
- Figure 38. Main Screen 57
- Saving the Configuration 59
- Figure 45. File Name Screen 61
- 8 SAN LUN Mapping 63
- 64 SAN LUN Mapping 64
- Creating a SAN LUN Mapping 65
- 66 SAN LUN Mapping 66
- Figure 48. Main Screen 66
- Deleting a SAN LUN Mapping 68
- Modifying a SAN LUN Mapping 68
- 70 SAN LUN Mapping 70
- 9 Controller Environmentals 71
- Operations 72
- Update Controller Firmware 73
- 74 Controller Environmentals 74
- Overview 75
- Advanced Settings 75
- Identity 76
- Fault Tolerance 77
- Host Ports 79
- Advanced Array Functions 81
- Modifying Arrays 82
- Verify Parity 83
- Identifying Drive Members 85
- Rebuilding an Array 86
- Figure 69. Drive Panel Screen 87
- Expanding an Array 88
- Trust an Array 89
- Restoring the Configuration 91
- Clearing the Configuration 93
- Advanced Drive Options 94
- Locate Drive 95
- Viewing Unassigned Free Space 96
- Expanding a Logical Drive 96
- Figure 85. Main Screen 97
- Deleting a Logical Drive 98
- Execution Throttle 101
- Scatter/Gather 101
- Additional StorView Functions 102
- Take Control Monitoring 103
- 13 Support and Updates 105
- 106 Support and Updates 106
- Caution 107
- 14 Event Logs 109
- 110 Event Logs 110
- Figure 97. Main Screen 110
- Figure 98. Event Log Screen 111
- 112 Event Logs 112
- Figure 100. Main Screen 113
- Figure 101. Event Log Screen 113
- 114 Event Logs 114
- Figure 104. Main Screen 115
- Figure 105. Event Log Screen 115
- Operating System Event Log 116
- List of Events 116
- Drive and Array Events 120
- Controller Port Events 125
- Enclosure Events 127
- NOTE 130
- Failed Drives Codes 133
- 15 Statistics 135
- Read-Ahead Statistics 138
- Command Cluster Statistics 139
- Introduction 141
- Sequential Access 142
- Access Size 142
- RAID 5 Sub-Array 143
- Multiple Drive Failures 143
- 17 Troubleshooting 145
- 150 Index 150
- 152 Index 152
Manuais e produtos relacionados com Servidores MAXDATA SR1202 M1
(23 páginas)
Servidores MAXDATA PLATINIUM 9000-4R Guia do Utilizador
(159 páginas)
(159 páginas)
(17 páginas)
(77 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.049 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais